CONSUMABLES

An assortment of metric grease nipple fittings supplied in handy storage case. M6 x 1 - Straight - 60 Pieces M6 x 1 - 45 Degree - 5 Pieces M6 x 1 ...

Set Contains Most Commonly Replaced Fuses Contents: 5Amp (Orange) x 20 10Amp (Red) x 20 15Amp (Blue) x 20 20Amp (Yellow) x 20 25Amp (Clear) x 20 3...

Set Contains Most Commonly Replaced Fuses Contents: 5Amp (Orange) x 20 10Amp (Red) x 20 15Amp (Blue) x 20 20Amp (Yellow) x 20 25Amp (Clear) x 20 3...

Contains: 10x MPD 1.25-156 x Bullet Male Connector x Red 10xFRD 1.25-156 x Bullet Female Connector x Red 10xMDD 1-250 x Male Connector x Red 10xFDD...

A selection of "R" type retaining pins, often referred to as Hitch Pins or Hair Pins. Contents: 8pcs - 4mm x 75mm 20pcs - 3.5mm x 45mm 25pcs - 2.8...

Contents: M1.6 x 25.4mm 150PCS M2.4 x 25.4mm 150PCS M2.4 x 38.1mm 100PCS M3.2 x 31.2mm 75PCS M3.2 x 50.8mm 50PCS M4.0 x 63.5mm 30PCS

Lynch pin with 10mm diameter shaft

Lynch pin with 8mm diameter shaft

Lynch pin with 6mm diameter shaft

A selection of copper washers for diesel injectors. Contains 10 pieces of each of the following sizes. Sizes are shown as Outside Diameter x Insid...

Contains: 30 PCS - 6 x 10 x 0.9mm 25 PCS - 8 x 12 x 0.9mm 20 PCS - 10 x 16 x 1.0mm 15 PCS - 11 x 17 x 1.3mm 10 PCS - 12 x 20 x 1.44mm 10 PCS - 16 ...

Ideal for cleaning prior to welding, removing paint or rust and general metal preparation prior to painting. Set contains: 50mm (2") Flat Wheel Br...

Ideal for removing rust, paint and descaling Strong 30mm stainless steel bristles Ergonomic soft grip handle Overall Length: 260mm (10" approx.)

High density wire brush ideal for cleaning prior to welding, removing paint or rust and general metal preparation prior to painting. Comfortable gr...

115 x 6.0 x 22mm Grinding Discs Depressed CentreFor Metal Max RPM: 13,30080 m/s

Type 27 Flap Discs - 230 x 22.2mm (9" x 7/8") Contains: 2 x Aluminium Oxide 80 Grit Max: 6,600RPM EN 13743

Type 27 Flap Discs - 230 x 22.2mm (9" x 7/8") Contains: 2 x Aluminium Oxide 40 Grit Max: 6,600RPM EN 13743

Type 29 Flap Disc Aluminium Oxide 80 Grit 72 Flaps 115 x 22.2mm (4 1/2" x 7/8") Max: 13,300RPM 80 m/s EN 13743

Type 29 Flap Disc Aluminium Oxide 60 Grit 72 Flaps 115 x 22.2mm (4 1/2" x 7/8") Max: 13,300RPM 80 m/s EN 13743

Type 29 Flap Disc Aluminium Oxide 40 Grit 72 Flaps 115 x 22.2mm (4 1/2" x 7/8") Max: 13,300RPM 80 m/s EN 13743

High performance multi-material masonry blade. The 10mm segments and perforated design offer fast, easy cutting of most materials found on construc...

High performance multi-material masonry blade. The 10mm segments and perforated design offer fast, easy cutting of most materials found on construc...

High performance multi-material masonry blade. The 10mm segments and perforated design offer fast, easy cutting of most materials found on construc...

Diamond disc for cutting masonry and concrete. Ideal for materials such as brick, roof tiles, high density concrete, kerb stones, patio slabs, rei...